Tag Archive: strong decoders

How To Enable And Load Cccam On Your Qsat Decoder

Okay, so there’s been a lot of talk about Qsat challenges ranging from stability and reliability during live matches, to number of channels available for viewing. Sometimes, cheap things bring us more stress. However, since the options for access to good tv programming in Africa remain few, the chinese technology opportunists will keep serving what the majority can afford.

The fact is, eventhough many know the reliability issues Qsat is saddled with, they still ignore CCcam and Oscam servers for avatarcam codes. Maybe the world of satellite technology enthusiasts and tv viewers is gradually but steadily waking up to the present recognition of the fact that a blend of the two is perhaps the only way to sustain a beautiful viewing experience in this present times.

So to get the whole package : Reliability, Stability and Complete Channel List, you have decided to get a cccam account to use on your Qsat. The intention here then is to show you how to enable cccam capability on your Qsat decoder, to give you access to all the benefits cccam users enjoy watching tv via dreambox, strong and openbox decoders.

Here’s what to do to access CCcam protocol on your Qsat :》

1. Press MENU On Your Remote.

2. Select SETTING

3. Navigate to XCAM SETUP ( Last Item On That Page. Can Be Found Just After SYSTEM)( If you dont find Xcam setup on this page, dont fret. The service is simply not active, and that’s not a problem . You can activate xcam by simply pressing 1512 Whiles on the SETTING page. Xcam menu will pop up).

After selecting Xcam in the previous step, the next page should present you with four items PATCH, SHARING, AVATARCAMHD and DQCAM. Now let’s move to the next step.

4. Select SHARING This where you are going to input information from your purchased CCCam account. Take note of what I’m going to say next. When you navigate to SERVER, PORT, USER and PORT, you have to press the RIGHT NAVIGATION BUTTON to bring up the onscreen keyboard for you to type in values. Also, After typing the correct values in each of the following sections, You MUST PRESS THE BLUE BUTTON on your remote to save what you typed, else you lose everything. While the onscreen keyboard is on, you can type special characters by PRESSING THE RED BUTTON on your remote control.

5. First Item is the SERVER NUMBER. Since this is your first cccam account, leave this at 1.

6. Then you have ACTIVE. This should be turned to ON.

7. Next item is PROTOCOL. Select CCCAM for the protocol.

8. Next you have SERVER. Here, type in server address/IP/url provided in your purchased account. E.g (sky9.dyndns.cx / / http:// **********

9. Now you have PORT. This is the relay network port of your server address. This should be a five digit number

10.Next Item is USER. Here input the username/UserID/LoginID provided In your account.

11.Now you have PASSWORD. Also provided by account supplier.

12. The last items include DESKEY and STATUS. Deskey is needful when protocol is MGcam or NewCam. Now You have entered all your values correctly. To connect the cccam, simply press the BLUE BUTTON on your remote control.

Before doing this however, you should have deactivated avatarcam, the inbuilt protocol Qsat uses to grant access to scrambled channels. To do this, simply move back one page from where you are, by pressing EXIT/BACK. Now select PATCH, and turn AVATARCAMHD from ON to OFF. When this is done, you can return to SHARING and connect your cccam.

Now, if your internet connection is ok, your purchased cccam is valid, and your input has been correctly done, the STATUS should indicate CONNECTED, which indicates you are good to go with viewing.

Using GPRS for CCCAM might not be the best, as you might not enjoy the kind of data packet flow that would keep your cccam working without breaks. I suggest you use a 3G/3.5G/3.75G/4G USB stick instead of a gprs direct simcard connection. Once slotted at the back or front of your box, Navigate to MENU>>> SETTING>>> ETHERNET CONFIG>>> 3G.
APN is usually Internet for most Service Providers, Dialcode is *99#. Save your settings and you would have an amazingly stable cccam viewing experience that you would relish. You can also use LAN CONNECTION if you have a wired fixed broadband internet. I Hope this article has provided you with enough information and you some help.

Should you need a stable, reliable and affordable CCcam Account as a reseller or End User, leave your comment here and I’ll contact you via your email so we can discuss. TV1 and Aone available.

Happy Christmas and a Fantastic New Year of New Technologies



Greetings in the Name of the Lord Jesus Christ.

This beautiful morning, I endeavour to write on a vitally important but readily confusing subject for many technology enthusiasts and satellite hobbyists. A major predicate for this initiative  has been the numerous emails I have received about this subject, which I perceive are likely to even increase after this post, but all the same, I deem writing this article better than staying quiet on the matter forever.

vsat 1

vsat 1

Many people want to find out how they can browse for free using their satellite tv decoder at home. Indeed, in one of my most read articles Connecting your satellite decoder to the internet, a lot of readers misunderstood the purpose of the article, taking it to be a lecture on how to browse the internet free with a satellite tv connection. I replied numerous comments and emails in that regard, and yet the email flood doesn’t just seem to abate. Now that I am about clarifying matters about satellite internet, many internet scammers are very much unlikely to be happy, and yet this is for the general good of all who love technology and truth, and being a servant of God, it’s appropriate to expose deception of every kind and the wickedness of selfish characters on the internet using technical ambiguity to live off innocent individuals.

Before I say anything more, I state emphatically here that you cannot use an ordinary tv satellite dish and decoder to get internet connectivity. As a matter of fact, when we talk about satellite internet, we are actually referring to VSAT. Vsat stands for “Very Small Aperture Terminal”, which refers to the technology whereby data is sent and received via an antenna. The antenna size is typically 1.2m diameter for Ku-Band, or 2.4m diameter for C-Band. The difference between the two is the Frequency in which they operate. C-Band systems operate on a lower frequency (3-6 Ghz) and are therefore less affected by rain fade, however due to the size of the hardware they are more costly. Ku Band systems operate on a higher Frequency (12-14 Ghz), and allow for smaller antennas, but depending on the power of the satellite can be affected by bad weather conditions. But for satellite broadband, dish sizes ranging between 1.2m – 3.7m are used, and that’s to say a 60cm or 90cm dish will just not be used in implementing a satellite internet link.

That’s just one part of the treatise. Now, VSAT is deployed mostly in very remote areas where only satellite installations would be the most convenient internet implementation with the lack of fast broadband for fast and secure data transmission. To install a VSAT, you would necessarily need the following :

  • A satellite antenna capable of transmitting and receiving data.
  • A BUC (Block Up Converter) for transmitting.
  • An LNB (Low Noise Down Converter) for receiving.
  • Coaxial Cable from the antenna to the indoor modem.
  • A satellite Modem capable of receiving and transmitting data such as E-mails etc.

An ordinary satellite tv dish does not have a BUC, only an LNB, which is capable of only receiving datagrams. That is also to say that, your tv dish, being an LNB-only setup, can only receive digital data, but cannot send. Internet however requires both an uplink and a downlink (send and receive), so that’s clear enough. Besides, dedicated satellite modems used for satellite internet links aren’t  the normal ADSL modems available on the market. A typical satellite modem looks something like this:

satellite modem

satellite modem

I provide a second image of a connected satellite modem to help you understand that this isn’t the normal modem/router you know.



By now I am sure you are beginning to get an idea what it takes to set up a satellite internet link. Like I mentioned earlier, an LNB cannot transmit data to a transponder on a satellite, it can only receive data streams for onward transmission into the modem for final decoding of the data packet. To be able to transmit data via a satellite dish to a satellite up in the sky and effectively communicate over the internet, you would need a BUC bucThis is always attached to a Ku or C band LNB attached to the dish/ satellite bowl. Small as it may seem to your eyes, this is the transceiver that can actually enable you to transmit whatever data you wish to a satellite up in the sky, and get it forwarded to other networks and nodes. An ordinary satellite tv dish doesn’t use, and just doesn’t support the use of a BUC, and that is why you cannot establish any form of internet connection using your small dish at home to get an internet connection. It is likely you have seen Banks and other corporate organisations using satellite internet with dishes like this :

RhemaNetworks  2

RhemaNetworks 2

This is the kind of setup that gives you satellite broadband connectivity, not your DStv, Mytv or MulitTV Ku / C band LNB dishes.

My dear friend, many scammers are out there taking advantage of the lack of adequate information on some of these matters, and duping unsuspecting individuals. I have taken time this morning just to help you understand the processes and hardware configuration involved in getting satellite internet at home or at the office. If inspite of all I have said, you still fall victim to an internet scam about using your tv dish to browse the net for free, that would be most unfortunate. There’s nothing like free browsing with satellite decoders. When you sign up for VSAT, you have to purchase a subscription, and you pay just as you would for fixed or mobile broadband. An eternal mental conditioning and desire to get everything free isn’t the best for  a technology enthusiast. So don’t get yourself into any free satellite internet cloud.

I am very happy I have been able to post on this, and may it bring versatile enlightenment to many. Relevant questions and comments are always welcome.

God bless us all.

Prince Kay

Rhema Network Solutions

%d bloggers like this: